What Are The Matters Needing Attention When Installing Reducer Coupling?

When installing the reducer, it is necessary to install a coupling. The installation of the coupling is very important. If the coupling is not installed properly, it will cause problems such as broken shaft of the reducer, which will bring unnecessary trouble to the user. How to install the coupling of the reducer? What should I pay attention to when installing? 

cycloid reducer


Here is an introduction for everyone:


If you purchase a coupling by yourself, please pay special attention to the following dynamic/static balance requirements for the coupling, otherwise the coupling will generate additional radial and axial forces on the reducer shaft and bearings, and accidentally damage the reducer .


When the peripheral speed of the outer diameter of the coupling is 30m/s and below, it must be statically balanced; when the peripheral speed of the outer diameter of the coupling exceeds 30m/s, it must be dynamically balanced.


If the coupling needs to be pre-heated during installation, it is recommended to use oil bath heating or heating furnace heating to make the heating uniform and prevent deformation. In order to protect the shaft seal, the heating temperature should be controlled when heating the coupling to prevent overheating and avoid the oil seal in an environment exceeding +100°C. Use a heat shield to reduce heat radiation, otherwise it will affect the service life of the oil seal.

Appropriate installation tools should be used when installing the coupling, and it is forbidden to install it by external force knocking, otherwise the gears, bearings and locking ring will be damaged. When installing the coupling, leave enough space for the fan to enter the air. If the installation space is not enough, please use other cooling methods.

CAMEL is a professional supplier,distributor and manufacturer of speed reducers and related accesories. including gear reducers, rotary reducer, worm gearbox, servo-gearbox, planetary gearboxes, planetary gear reducer helical gear reducers, planetary gearbox, right angle gear reducer, gear reduction, gear motors, electrical motors, DC motors, DC gear motor, dc gearedmotors, AC gear motor, AC motors, servo motors, ac servo motor, dc servo motor, servomotor, bearings, gears, spur gear, helical gear, bevel gear, worm gear, planetary gear, couplings, oil seals, belts, chains, etc. If you have any need, please feel free to contact CAMEL:

sales@china-speed-reducer.com

https://www.china-speed-reducer.com

https://www.gear-reducer-worm.com

https://www.gear-worm-reducer.com

https://www.gears-speed-reducers.com

https://www.gearsreducers.com


评论

发表评论

此博客中的热门博文

What Is A Induction Motor?

图片
Induction motor is also called ""asynchronous motor "", that is, the rotor is placed in a rotating magnetic field, under the action of the rotating magnetic field, a rotating torque is obtained, so the rotor rotates. The rotor is a rotatable conductor, usually in the shape of a squirrel cage. The stator is the non-rotating part of the motor, and its main task is to generate a rotating magnetic field. The rotating magnetic field is not realized by mechanical methods. Instead, alternating current is passed through several pairs of electromagnets to cyclically change the magnetic pole properties, so it is equivalent to a rotating magnetic field. This kind of motor does not have brushes or slip rings like DC motors. There are single-phase motors and three-phase motors depending on the type of AC used. Single-phase motors are used in washing machines, electric fans, etc.; three-phase motors are used as power for factories equipment. Working principle Through the relative...
阅读全文

Which Industries Do Servo Reducers Use More?

图片
Servo reducer is a new type of reducer with wide versatility. By virtue of its own advantages, it has been widely used in many industries. So do you know which industries need to use servo reducers? Servo reducers are needed in the following industries: 1. Machinery manufacturing industry In the mechanical transmission industry, the servo reducer is an intermediate device that connects the power source and the actuator. Usually, it uses the power of the electric motor, internal combustion engine and other high-speed operation through the small gear on the input shaft to mesh with the large gear on the output shaft to achieve the purpose of deceleration and transmit greater torque. For example, in the cement machinery industry, the servo reducer, as the second-largest general-purpose machinery and equipment to be used, will continue to rise with the strong demand of the cement machinery industry. 2. Industrial automation industry Servo reducer has the advantages of strong anti-overload ...
阅读全文

What Is A Servo Motor?How Does A Servo Motor Work?

图片
What is a servo motor? The servo motor can also be called an executive motor, which is an executive component in an automatic control system. Its job is to convert the received electrical signal into an angular velocity output or an angular displacement output on the motor shaft. Servo motor classification There are two classifications of DC servo motor and AC servo motor. The main feature is that there is no rotation when the signal voltage is zero; the speed will drop at a uniform speed as the torque increases. DC servo motors are ideal for small applications, but they cannot handle large current surges. However, AC servo motors can cope with higher current surges and are widely used in industrial machinery. When it comes to price, DC motors are cheaper than AC servos, so they are used more. In addition, DC motors are specifically designed for continuous rotation, which makes them ideal for robot motion. How does a servo motor work? The working principle of the servo motor is relativ...
阅读全文