What Are Common Problems And Solutions For Cycloidal Reducers?

Cycloidal pinwheel reducer is a common equipment in the factory. Since it is a mechanical device, more or less mechanical problems will naturally occur. Let's introduce some common problems of cycloid pinwheel reducer.

worm gear reducer

1. Noise

The most common fault of the cycloid reducer is noise, which is also the easiest problem to find. Generally speaking, if there is noise, it is likely to be poor gear meshing or corresponding damage. If there is a noise, you need to turn off the equipment immediately and disassemble it to check the condition of the relevant parts. If you leave it alone, it is prone to bigger problems.


2. The host is overheated

The host is overheated. If the host is overheated, it is most likely due to overload or too little grease. At this time, we need to let the reducer take a break. If the operation still overheats after the break, it may be that the model does not match, and the model needs to be replaced. In addition, it is necessary to confirm the grease indicator line, if it is too low, it will increase the loss of the host.


3. Oil spill

The last common problem is oil leakage. If such a fault is found, it is likely that too much grease is placed, and part of the grease can be properly removed. On the other hand, the damage of the breather cap can also cause oil leakage. If there is an oil leakage, the breather cap needs to be confirmed and closed accordingly to solve the oil leakage.

CAMEL is a professional supplier,distributor and manufacturer of speed reducers and related accesories. including gear reducers, rotary reducer, worm gearbox, servo-gearbox, planetary gearboxes, planetary gear reducer helical gear reducers, planetary gearbox, right angle gear reducer, gear reduction, gear motors, electrical motors, DC motors, DC gear motor, dc gearedmotors, AC gear motor, AC motors, servo motors, ac servo motor, dc servo motor, servomotor, bearings, gears, spur gear, helical gear, bevel gear, worm gear, planetary gear, couplings, oil seals, belts, chains, etc. If you have any need, please feel free to contact CAMEL:

sales@china-speed-reducer.com

https://www.china-speed-reducer.com

https://www.gear-reducer-worm.com

https://www.gear-worm-reducer.com

https://www.gears-speed-reducers.com

https://www.gearsreducers.com


评论

发表评论

此博客中的热门博文

What Is A Induction Motor?

图片
Induction motor is also called ""asynchronous motor "", that is, the rotor is placed in a rotating magnetic field, under the action of the rotating magnetic field, a rotating torque is obtained, so the rotor rotates. The rotor is a rotatable conductor, usually in the shape of a squirrel cage. The stator is the non-rotating part of the motor, and its main task is to generate a rotating magnetic field. The rotating magnetic field is not realized by mechanical methods. Instead, alternating current is passed through several pairs of electromagnets to cyclically change the magnetic pole properties, so it is equivalent to a rotating magnetic field. This kind of motor does not have brushes or slip rings like DC motors. There are single-phase motors and three-phase motors depending on the type of AC used. Single-phase motors are used in washing machines, electric fans, etc.; three-phase motors are used as power for factories equipment. Working principle Through the relative
阅读全文

Which Industries Do Servo Reducers Use More?

图片
Servo reducer is a new type of reducer with wide versatility. By virtue of its own advantages, it has been widely used in many industries. So do you know which industries need to use servo reducers? Servo reducers are needed in the following industries: 1. Machinery manufacturing industry In the mechanical transmission industry, the servo reducer is an intermediate device that connects the power source and the actuator. Usually, it uses the power of the electric motor, internal combustion engine and other high-speed operation through the small gear on the input shaft to mesh with the large gear on the output shaft to achieve the purpose of deceleration and transmit greater torque. For example, in the cement machinery industry, the servo reducer, as the second-largest general-purpose machinery and equipment to be used, will continue to rise with the strong demand of the cement machinery industry. 2. Industrial automation industry Servo reducer has the advantages of strong anti-overload
阅读全文

What Is A Servo Motor?How Does A Servo Motor Work?

图片
What is a servo motor? The servo motor can also be called an executive motor, which is an executive component in an automatic control system. Its job is to convert the received electrical signal into an angular velocity output or an angular displacement output on the motor shaft. Servo motor classification There are two classifications of DC servo motor and AC servo motor. The main feature is that there is no rotation when the signal voltage is zero; the speed will drop at a uniform speed as the torque increases. DC servo motors are ideal for small applications, but they cannot handle large current surges. However, AC servo motors can cope with higher current surges and are widely used in industrial machinery. When it comes to price, DC motors are cheaper than AC servos, so they are used more. In addition, DC motors are specifically designed for continuous rotation, which makes them ideal for robot motion. How does a servo motor work? The working principle of the servo motor is relativ
阅读全文